1000W Electric Spray Gun – HVLP Paint Sprayer with 1400ML Container

HVLP Paint Sprayer for a Smooth, Factory-Look Finish

An HVLP paint sprayer turns hours of brush and roller work into a fast, even spray. This corded electric model runs a 1000W motor for steady output, and its high volume, low pressure design lays paint down softly, with less overspray bouncing back into the air. It plugs into a standard outlet, so no battery ever runs flat in the middle of a fence run. The big 1400ml container means fewer refill stops, and at just 3.45 pounds this HVLP paint sprayer stays comfortable in one hand.

What You Get with This HVLP Paint Sprayer

• 1000W corded electric motor — steady spray output for indoor and outdoor projects, no battery to charge, no compressor to haul.
• 1400ml removable container — more surface per fill, and it unscrews for fast refills and cleaning.
• 4 copper nozzles — four sizes for different paint types and project sizes, in durable copper rather than plastic.
• 3 spray patterns — horizontal, vertical and circular, matched to the surface in front of you.
• Adjustable flow control — fine-tune the paint output for detail work or large surfaces, with less overspray and waste.
• Complete kit — viscosity cup, filter funnels and papers, protective gloves, cleaning brush, unclogging needle and user manual.

3 Spray Patterns and 4 Copper Nozzles

Matching the pattern to the surface is what makes an HVLP paint sprayer so forgiving for beginners. Use the horizontal pattern for tall, narrow surfaces like fence boards and doors, the vertical pattern for wide runs like walls and cabinet sides, and the circular pattern for small detail like chair legs and spindles. The four copper nozzles extend the range: smaller nozzles suit thin coatings and fine furniture work, larger nozzles move thicker paint across fences and walls. Strain paint through a filter funnel and check it with the viscosity cup before you start, and the spray fan stays smooth and even.

Made for Cabinets, Furniture, Fences, Doors and Walls

Cabinets are where this sprayer earns its keep — a brush leaves marks in cabinet paint, while the spray lays the coat flat and level, the way factory cabinets look. The same control suits furniture, giving dressers, tables and chairs thin, even coats that keep edges and detail sharp. Outside, the wide patterns cover fence boards, gates and garden furniture quickly, and the adjustable flow keeps waste down. One HVLP paint sprayer covers that whole list, replacing a shelf of brushes, rollers and trays.

Quick to Use, Easy to Clean

Thin the paint only if the viscosity cup says it needs it, test the flow knob on scrap wood, then spray in steady, overlapping passes, keeping the gun moving — two light coats beat one heavy coat every time. When the job is done, the spray components come apart quickly: wash out the container, nozzle and spray head, run the cleaning brush through the passages, and clear the nozzle with the unclogging needle. Clean it while the paint is still wet and the whole job takes minutes.

Frequently Asked Questions

What is an HVLP paint sprayer?

HVLP means high volume, low pressure. The sprayer pushes a high volume of air at low pressure (20 psi maximum) to break paint into a fine, soft spray that lands smoothly with less overspray — the finish that makes cabinets and furniture look factory-painted.

How do you use an HVLP paint sprayer?

Filter the paint into the 1400ml container, check it with the viscosity cup, fit the right copper nozzle, pick a spray pattern, test the flow on scrap material, then spray in steady overlapping passes, keeping the gun moving from before the trigger pull to after you release it.

Can you spray latex paint with an HVLP sprayer?

Yes — latex is the standard coating for the cabinets, furniture, doors and walls this sprayer is made for. Thick latex may need thinning first: check it with the viscosity cup, strain it, and fit a larger nozzle.

Do you need to thin paint for an HVLP sprayer?

Often, yes. Thin paints may spray straight from the can, while thick latex usually needs a little thinning to spray finely. The included viscosity cup is the test: if the paint runs through slower than the manual’s guide time, thin it a little at a time.

How do you clean an HVLP paint sprayer?

Empty the container, take the removable parts apart and wash the paint out right after spraying. Use the cleaning brush for the internal passages and the unclogging needle for dried paint in the nozzle — a few minutes’ work that keeps the spray pattern even.

A kitchen refresh, a furniture flip or a fence that has waited two summers — this kit makes it a weekend job: 1000W corded power, a 1400ml container, 4 copper nozzles and 3 spray patterns, ready out of the box.